Can anybody help me with a "printenv" from an "out-of-the-box" dm365 EVM as I did not save it initially and it has evolved too much now and I am not sure what the exact setup was where I began. My NAND socket is broken and I am trying to find a solid way of getting the board to boot up now also. This is also part of learning what exactly the bootargs does so any pointers to where/how to find this would be appreciated.
Thanks, Jinh T.
Send setenv bootargs 'mem=116M console=ttyS0,115200n8 root=/dev/mtdblock3 rw rootfstype=yaffs2 ip=off davinci_capture.device_type=4 dm365_imp.oper_mode=0'
Please contact Spectrum Digital support to get the NAND socket fixed first. Without the NAND there is not much to get anything to work.
PS: Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.