arago do-fetch failed for u-boot-am33x from git

Try setting your SRC_URI to use git://.......

SRC_URI = "git://arago-project.org/git/projects/?p=u-boot-am33x.git;protocol=git;branch=master"

Chase

Hi chase,

                Thanks for the reply.Ya, I forgot to change the http protocol before. But after I changed it,

its showing me different error that,the remote end hung up unexpectedly . I tried to clone it mannually,

using 

           git clone git://arago-project.org/git/projects/?p=u-boot-am33x.git;protocol=git;branch=master

but same above mentioned error is showing up.I do have similar kind of errors with two more recipe files:

i) qt-patientcare_1.0.bb 

ii) rt-tests_git.bb

    i)       with qt-patientcare_1.0.bb , where SRC_URI is set as below :

BRANCH ?= "master"
SRCREV = "ceb38cf2a0af923d79f64ccc4359c1ad401954ff"

SRC_URI = "git://arago-project.org/git/projects/qt4-demos.git;protocol=git;branch=${BRANCH}"

           but after running the command  MACHINE=am335x-evm  bitbake  --buildfile=qt-patientcare_1.0

 ,i am getting below errors ::

utc-arago@utc-arago-desktop:~/oe$ MACHINE=am335x-evm bitbake --buildfile=qt-patientcare_1.0

Build Configuration:
BB_VERSION        = "1.10.2"
METADATA_BRANCH   = "master"
METADATA_REVISION = "da378da"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "am335x-evm"
DISTRO            = "angstrom"
DISTRO_VERSION    = "2011.09"
TARGET_FPU        = "hard"

--2012-04-05 11:38:04--  http://www.angstrom-distribution.org/unstable/sources/git_arago-project.org.git.projects.qt4-demos.git_ceb38cf2a0af923d79f64ccc4359c1ad401954ff.tar.gz
Resolving www.angstrom-distribution.org... NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 2 of 19 (ID: 8, /home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb, do_fetch)
NOTE: package qt-patientcare-1.0-r0.0: task do_fetch: Started
NOTE: fetch http://www.angstrom-distribution.org/unstable/sources/git_arago-project.org.git.projects.qt4-demos.git_ceb38cf2a0af923d79f64ccc4359c1ad401954ff.tar.gz
188.40.83.200
Connecting to www.angstrom-distribution.org|188.40.83.200|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-04-05 11:38:06 ERROR 404: Not Found.

From git://arago-project.org/git/projects/qt4-demos
 * branch            master     -> FETCH_HEAD
NOTE: Creating tarball of git repository
fatal: failed to unpack tree object ceb38cf2a0af923d79f64ccc4359c1ad401954ff
ERROR: TaskFailed event exception, aborting
ERROR: Build of /home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb do_fetch failed
ERROR: Task 8 (/home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb, do_fetch) failed with exit code 1
ERROR: '/home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb' failed
NOTE: Task failed: Fetch failed: Unable to fetch URL git://arago-project.org/git/projects/qt4-demos.git;protocol=git;branch=master from any source.
NOTE: package qt-patientcare-1.0-r0.0: task do_fetch: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of /home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb do_fetch failed
ERROR: Task 8 (/home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb, do_fetch) failed with exit code 1
ERROR: '/home/utc-arago/oe/arago/recipes/ti/qt-patientcare_1.0.bb' failed
utc-arago@utc-arago-desktop:~/oe$

ii) with rt-tests_git.bb , where SRC_URI is set as below :

SRCREV = "42ab9e7cd259fae674dc2b2aa2962caaf8f09409"

PV = "0.51+${PR}+gitr${SRCREV}"

SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tglx/rt-tests;protocol=git"

               but after running the command  MACHINE=am335x-evm  bitbake  --buildfile=rt-tests_git

 ,i am getting below errors :

utc-arago@utc-arago-desktop:~/oe$ MACHINE=am335x-evm bitbake --buildfile=rt-tests_git

Build Configuration:
BB_VERSION        = "1.10.2"
METADATA_BRANCH   = "master"
METADATA_REVISION = "da378da"
TARGET_ARCH       = "arm"
TARGET_OS         = "linux-gnueabi"
MACHINE           = "am335x-evm"
DISTRO            = "angstrom"
DISTRO_VERSION    = "2011.09"
TARGET_FPU        = "hard"

NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 1 of 18 (ID: 10, /home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb, do_setscene)
--2012-04-05 11:57:51--  http://www.angstrom-distribution.org/unstable/sources/git_git.kernel.org.pub.scm.linux.kernel.git.tglx.rt-tests_42ab9e7cd259fae674dc2b2aa2962caaf8f09409.tar.gz
Resolving www.angstrom-distribution.org... NOTE: package rt-tests-0.51+r0+gitr42ab9e7cd259fae674dc2b2aa2962caaf8f09409-r0: task do_setscene: Started
NOTE: package rt-tests-0.51+r0+gitr42ab9e7cd259fae674dc2b2aa2962caaf8f09409-r0: task do_setscene: Succeeded
188.40.83.200
Connecting to www.angstrom-distribution.org|188.40.83.200|:80... NOTE: Running task 2 of 18 (ID: 8, /home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb, do_fetch)
connected.
HTTP request sent, awaiting response... NOTE: package rt-tests-0.51+r0+gitr42ab9e7cd259fae674dc2b2aa2962caaf8f09409-r0: task do_fetch: Started
NOTE: fetch http://www.angstrom-distribution.org/unstable/sources/git_git.kernel.org.pub.scm.linux.kernel.git.tglx.rt-tests_42ab9e7cd259fae674dc2b2aa2962caaf8f09409.tar.gz
404 Not Found
2012-04-05 11:57:52 ERROR 404: Not Found.

fatal: The remote end hung up unexpectedly
Cloning into /home/utc-arago/oe/downloads/git/git.kernel.org.pub.scm.linux.kernel.git.tglx.rt-tests...
ERROR: TaskFailed event exception, aborting
ERROR: Build of /home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb do_fetch failed
ERROR: Task 8 (/home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb, do_fetch) failed with exit code 1
ERROR: '/home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb' failed
NOTE: Task failed: Fetch failed: Unable to fetch URL git://git.kernel.org/pub/scm/linux/kernel/git/tglx/rt-tests;protocol=git from any source.
NOTE: package rt-tests-0.51+r0+gitr42ab9e7cd259fae674dc2b2aa2962caaf8f09409-r0: task do_fetch: Failed
ERROR: TaskFailed event exception, aborting
ERROR: Build of /home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb do_fetch failed
ERROR: Task 8 (/home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb, do_fetch) failed with exit code 1
ERROR: '/home/utc-arago/oe/arago-oe-dev/recipes/rt-tests/rt-tests_git.bb' failed
utc-arago@utc-arago-desktop:~/oe$

   How to resolve this issue??? arago-tisdk-image is not getting build up because of these 2 packages.Any suggestions

would be helpful from your side :)

Thanks in advance,

Surendra

Hi chase,

                I tried it for several times but every time its showing me the same error.

MACHINE=am335x-evm  bitbake  --buildfile=qt-patientcare_1.0

MACHINE=am335x-evm  bitbake  --buildfile=rt-tests_git

                Above 2 packages are not getting fetched from the source repository.The

arago-tisdk-image is not getting build up because of this.One more query, why the

SRC_URI is getting redirected to

http://www.angstrom-distribution.org/unstable/sources/.............

                  I visited those links which shows the page doesnt exist.How to resolve

this issue??Thanks for your patience reply :)

Surendra

Surendra,

I'm not sure about the --buildfile usage above.

As for the SRC_URI redirection, that is the result of source mirroring.  The fetch will look to the mirrors first to see if the package exists there first, if not then it will fall back to cloning the repository.

I have just done a fetch of both of these repositories with no issue.  Are you sure you have your GIT proxy setup correctly?

Chase

Hi,

     Thanks for the reply.Chase, my intention was to create ipks using bitbake file.For other packages

using the command MACHINE=am335x-evm  bitbake  --buildfile=<recipe name> , I was

able to did the same.In this procedure the downloads folder gets populated with the package.tar.gz

and corresponding package.tar.gz.md5. If i clone the qt-patientcare_1.0 using the git clone,

              git  clone  git://arago-project.org/git/projects/qt4-demos.git;protocol=git;branch=master

qt4-demos folder gets cloned.But there is no .tar.gz or .md5 for that folder.

                             My query is that, how to work with that;i mean where to keep it (in downloads

folder) and how to create .ipks out of it?? My final aim is to build the rtfs for arago-tisdk-image,

      MACHINE=am335x-evm  bitbake  --buildfile=arago-tisdk-image

but in the middle of this building procedure its getting failed due to qt-patientcare_1.0.bb and rt-tests_git.bb.

Prabhakar, rt-tests_git is not getting cloned using the git clone.How to resolve this issue for achieving build

automation???

Thanks,

--Surendra

Hi,

which branch are you trying to clone ? Can you post the link of it..

Thx,

--Prabhakar Lad

hi Prabhakar,

                      I have posted the rt-tests_git.bb file below.I need to create the .ipks using the .bb file.

My query is that how come manual cloning is going to help me.For building rtfs I need these .ipk

creations automatically to be done.How to resolve this issue??

-------------------------------------------------- rt-tests_git.bb-----------------------------------------------------------

DESCRIPTION = "Real-time tests, such as cyclictest, for real-time linux PREEMPT RT kernels"
HOMEPAGE = "http://rt.wiki.kernel.org/index.php/Cyclictest"
LICENSE = "GPL"
PR = "r0"

SRCREV = "42ab9e7cd259fae674dc2b2aa2962caaf8f09409"

PV = "0.51+${PR}+gitr${SRCREV}"

SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tglx/rt-tests;protocol=git"

S = "${WORKDIR}/git"

# Limit to cyclictest only for non-real-time kernels.
# EXTRA_OEMAKE = "cyclictest"

TARGET_CC_ARCH += "${LDFLAGS}"

do_install() {
  install -d ${D}${bindir}
  # any file that is executable by user and/or group
  for binary in `find . -perm /u+x,g+x -type f`
  do
    install -m 0755 $binary ${D}${bindir}
  done
}

------------------------------------------------------------------------------------------------------------------------------

thanks,

--surendra

Surendra,

I just realized that you are trying to build qt-patientcare.  That has been pulled in the qt4-demos repository.  the arago meta data was also updated in the next branch to remove this but has not yet been merged into master.  Please checkout the next branch of the arago repository because qt-patientcare has been removed there and rt-tests has been updated there.

You can do this with

git branch --track next origin/next

git checkout next

Chase

Hi chase,

               Thanks.Yes,you were right.In next branch arago-tisdk-image is now getting build up.

Right now I am trying to customize default arago-tisdk-image rtfs. I need to add some

additional packages and need to delete unwanted ones.In arago/recipes/tasks recipe files

by adding the .ipk package names I can do addition.But i am not sure about deletion process.

I mean, I cross checked all 9 task recipe files contents (mentioned in arago-tisdk-image.bb )

manually with installed-packages.txt (arago-tmp/deploy/glibc/images/am335x-evm/arago-tisdk-image-glibc-ipk-2011.09-am335x-evm-testlab/)

and find out  additional 537 .ipk package names,about which i don't know how did they get

incorporated in the installed-packages.txt.  Because they were not specifically mentioned in those

9 task recipe files.

examples:

angstrom-version_1:2011.09-r7.6_am335x-evm.ipk
arago-gpl-notice_1.0-r2.6_all.ipk
bc_1.06-r2.6_armv7a.ipk
binutils_2.20.1-r13.4-arago1.6_armv7a.ipk
binutils-symlinks_2.20.1-r13.4-arago1.6_armv7a.ipk
bluetooth-gui_1.0-r7+gitref5b7eb58c8125b826ca36d94c594f09f462b3ab.6_armv7a.ipk
bonnie++_1.03c-r0.6_armv7a.ipk
dbus_1.4.1-r20.0-arago3.6_armv7a.ipk
dbus-x11_1.4.1-r20.0-arago3.6_armv7a.ipk
debianutils_2.30-r2.6_armv7a.ipk
directfb_1.4.11-r1.0-arago1.6_armv7a.ipk
dt_17.07-r0.1.6_armv7a.ipk
eggdbus_0.6-r0.6_armv7a.ipk
gadget-init_1.0-r6.6_am335x-evm.ipk
gconf_2.28.0-r2-arago1.6_armv7a.ipk
gdk-pixbuf-loader-gif_2.20.1-r10.4.6_armv7a.ipk
gdk-pixbuf-loader-jpeg_2.20.1-r10.4.6_armv7a.ipk
gdk-pixbuf-loader-png_2.20.1-r10.4.6_armv7a.ipk
gdk-pixbuf-loader-xpm_2.20.1-r10.4.6_armv7a.ipk
gnome-keyring_2.28.2-r1.6_armv7a.ipk
gnome-vfs_2.24.1-r3.6_armv7a.ipk
gnome-vfs-plugin-file_2.24.1-r3.6_armv7a.ipk
gst-ffmpeg_0.10.11-r1-arago1.6_armv7a.ipk
gst-plugin-a52dec_0.10.16-r12.1-arago1.6_armv7a.ipk
gst-plugin-adder_0.10.30-r12.0-arago1.6_armv7a.ipk
gst-plugin-adpcmdec_0.10.20-r12.2-arago3.6_armv7a.ipk
gst-plugin-adpcmenc_0.10.20-r12.2-arago3.6_armv7a.ipk.............etc

              If I want to remove some of those out of 537 .ipk packages,hw am i suppose to do that???

Any suggestion from your side would be helpful.Thanks in advance.

--Surendra

Surendra,

Those are likely pulled in as dependency packages the other packages.  Bitbake is good about that so that if you want to install a package that requires some other libraries (like perhaps libgcc) you don't have to call that out explicitly.  You can remove them from the file system using the package manager like http://processors.wiki.ti.com/index.php/AMSDK_File_System_Optimization/Customization.  But you need to be careful that you don't remove something that is a dependency of something you actually want to use.

Using the -g option to bitbake.  i.e.:

bitbake -g my-image

Will give you a package-depend.dot file which you can look through to find out what packages are using a particular ipk and decide if you want to remove it.

Chase

Hi Chase,
                      Thanks for your reply.Yes, using bitbake -g my-image three .dot files were generated,

- pn-depends.dot, task-depends.dot and package-depends.dot.From the below link ,

                              

Surendra,

I don't know all the differences in the .dot files but I use the package-depends.dot file to look at what dependencies are brought in by each package.

For your other compile issues are you using the arago toolchain or codesourcery?  You should be using the Arago toolchain from inside of the SDK in the linux-devkit/bin directory.

Lastly, for the bluez-libs package try just adding bluez-libs and not the libbluetooth3 package.

Chase

Hi Chase,

                 for compilation i am using arago toolchain only.its arago-2011.09-armv7a-linux-gnueabi-sdk.

export PATH=/opt/arago-2011.09/armv7a/bin:$PATH ,its working fine for other packages.Only above mentioned

5 packages showing errors.Is there any other alternative way to do so??

With regards,

Surendra