TI E2E Community
DM8168 NAND Flash block error increasing quickly
I develop on dm8168 evm board using dvr_rdk 2.80, and now i flash the jffs2 file system to nand flash,
and in my app i capture video and do encoder ,and write the 264 stream to hard disk,
when the app runs long time for example more than 2 hours , the print show that nand flash error blocks appears more and more, and the system broken,
when we power up again the linux system boot failure, it seems that the jffs2 system in has been broken,
Does someone kowns how will this happens , is that the jffs2 system flash error or some other reasons?
there are also error detected when the app run , and every time we flash the jffs2 system , the error block increased.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.