Linux

Browse by Tags

Linux

Welcome to the Linux Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
uboot
Related Posts

  • Forum Post: DM35x_FlashAndBootUtils_1_50, ubl, u-boot and Linux Flash Blocks Help

    Garry Jackson
    Hello All Can somebody please confirm if the following is correct or incorrect. I need a sanity check on this before I can continue.. First, I am using my custom designed DM355 board for this work with the linux kernel Linux-2.6.10_mvl401 this board has the 29F4G08AAC on it which is page and block...
    on Dec 11, 2009

  • Forum Post: 6467 u-boot source code

    Danny H
    Hi all, I'm looking for the source code for the U-boot for the Dm6467. I did not find it in the SDK etc. (V2.xx, V3). Alternatively, I tried the latest u-boot git, with support for 6467, but it does not compile (actually, does not link) correctly with the montavista tools. How can...
    on Apr 11, 2010

  • Forum Post: Booting DVEVM 6446 using NFS +TFTP

    joe ghanem
    Hi all, I'm using DVEVM that does not contain preloaded demo, and without DVSDK DVDS. I downloaded all the stuff from the web. I started following a step by step the GSG using Redhat 4 as a host on VMWare workstation. I installed all the software as GSG states and did every thing from stopping...
    on Apr 26, 2010

  • Forum Post: Bootig the DVEVM Using NFS + TFTP

    joe ghanem
    Hi all, I'm using DVEVM that does not contain preloaded demo, and without DVSDK DVDS. I downloaded all the stuff from the web. I started following a step by step the GSG using Redhat 4 as a host on VMWare workstation. I installed all the software as GSG states and did every thing from...
    on Apr 27, 2010

  • Forum Post: Re: DM365 UBL NAND boot & Uboot

    Marc DAmato
    Aravind, I was able to get UBL pjt to use in CCS but could not find uboot pjt. Is this available? If so, where could i get it? Thanks. Marc
    on Apr 28, 2010

  • Forum Post: EVM 6467T Serial Flashing Issue

    babs76
    We purchased a DaVinci 6467T HD 1080P EVM module from TI. I followed the "getting started" instructions verbatim from the Evaluation Module Setup Guide. The EVM out of the box did not boot the demo application as specified. I noticed the "BOOTME" message from serial console. I...
    on Jun 3, 2010

  • Forum Post: UBoot Environment Vaiables

    Joe Tijerina
    I'm using Logic PDs OMAP L138 experimenter kit and I'm trying to figure out where the Uboot environment variables are stored. Through an emulation terminal, I set the Uboot environment variables and save these. After doing a 'saveenv' command, a messge is printed saying that the variables...
    on Jul 9, 2010

  • Forum Post: u-boot NAND read error

    Matt Burtch
    Hello, I'm having a problem with u-boot and writing/reading the kernel image to onboard Flash. Our target hardware has the DM365 and an 8Gb NAND flash. I'm having an issue where I cannot read from the flash chip from u-boot. I am able to erase blocks and read back the erased blocks without...
    on Jul 20, 2010

  • Forum Post: EMAC can perform in Tx but not in Rx with DaVinci DM365 + Davicom 9161

    Guillaume ***
    Hello, We have made a custom IP surveillance camera starting from the reference design Kit (IPNC / DM368). We have modified the GIO assignment, but beyond the IOMUX settings change (to enable corresponding GIOs) we have not found in the source code how GIOs shall be remapped. Could anyone advise...
    on Sep 22, 2010

  • Forum Post: Ramdisk Test on DM6467

    Vincent 51111
    Hi, I wanna make a RamDisk for DM6467. I followed the instructions at http://processors.wiki.ti.com/index.php/How_to_Create_a_Ramdisk_with_Auto-run_Demo. I cannot run /etc/rc.d/rc.local . By NFS, rc.local runs automatically after booting. When put in Ramdisk, it failed to run automatically...
    on Oct 10, 2010

  • Forum Post: OMAP-L138 NFS Boot Issue (U-boot env variable "ipaddr" not set)

    smh123
    OMAPL-138 experimenter kit I have followed the directions in the GSG ( http://processors.wiki.ti.com/index.php/GSG:_Setting_up_OMAP-L1/AM1x_Target_File_System#Writing_a_Simple_Program_and_Running_it_on_the_EVM ) and am having some trouble doing an NFS boot. It seems that it has something to do...
    on Nov 24, 2010

  • Forum Post: OMAP-L138 NAND_ECC_HW and U-Boot

    Szymon Kuklinski
    Hi I'm a little bit confused about how OMAP-L138 hardware supports 4-bit ECC for NAND devices. NAND device in question is: SAMSUNG K9F2G08UXA - Page Program : (2K + 64)Byte - Block Erase : (128K + 4K)Byte By default, DaVinci-PSP-SDK-03.20.00.06 is configured in terms of NAND ECC as follows...
    on Dec 17, 2010

  • Forum Post: SD card uboot flash

    Mohammad Kapadia
    HI, I am trying to load uboot and ubl by using SD card flash method i did it everything successfully as instructed in the method but when i insert my SD card in my DM355 Leopard board and then by keeping the switch on SD card boot position I am getting the following lines only on my minicom...
    on Dec 28, 2010

  • Forum Post: arago u-boot and omap-l137: compilation problem

    Miriano
    Hi all, I've retrieved u-boot from arago git repository ( git://arago-project.org/git/projects/u-boot-davinci.git) but when I try to build it for Omap-l137(da830evm_config) I get the following error: arch/arm/cpu/arm926ejs/start.o: In function `fiq': /develop/u-boot-davinci/arch/arm...
    on Mar 28, 2011

  • Forum Post: "Memory error" on kernel boot

    Selim temur
    Hi, We developed our own DM355 board and boot it successfully and run u-boot. But when I try to boot the kernel, sometimes it prints "Memory error" at the output. Complete console output is as follows --> DM355 MVK # bootm ## Booting image at 80700000 ... Image Name: Linux-2...
    on Apr 27, 2011

  • Forum Post: Re: AM1808 flashing NOR_FLASH on UI board.

    Mellissa Dalby
    Ofer Eilon Hi Sudhaker, I have tried the attached and without success. I think the problem is with the u-boot.bin, I have compiled the u-boot.bin to NOR but I am not sure if I did it correctly. Could you send me u-boot.bin for NOR (AM1808)? Thanks, Ofer I got this...
    on May 5, 2011

  • Forum Post: Re: LCD Splash Support in U-Boot (AM3517)

    David Paden
    Well, it looks like I'll be working on this in the near future. I'll look in to the link you sent me as soon as I can. How similar is the Beagle's DSS system to the AM3517? Is the register layout the same?
    on May 10, 2011

  • Forum Post: [DM3730] Use 'dhcp' to get ip address unsuccessfully

    Danfeng Lu
    Hi all, I am having a problem connecting our DM3730 EVM board to our PC with Ubuntu OS via DHCP. The appearance is as follows: OMAP3_EVM # dhcp smc911x: detected LAN9220 controller smc911x: phy initialize smc911x: MAC 00:50:c2:7e:96:86 BOOTP broadcast 1 BOOTP broadcast 2 BOOTP...
    on May 21, 2011

  • Forum Post: loading kernel large sized uImage via u-boot

    Eran Yurman
    we are using memmove to copy a big kernel image (approx. size 16M Bytes ). our kernel image is bigger than the public linux image and we're trying to load the kernal from flash memory to RAM via u-boot code (memmove) and it fails(CPU exception) upon sizes above 15.7M Byte. smaller sized images are...
    on May 23, 2011

  • Forum Post: NFS boot issues

    francis kumar
    Hi All, I just started with an AM1808 EVM Development Kit. I’m trying to boot via tftp and use nfs as root filesystem. My Target(AM1808) ip assigned as - 192.168.1.100 My Host Ubuntu(10.04LTE)server - 192.168.1.200. I have modified few steps for NFS as follows: ...
    on May 26, 2011

  • Forum Post: Re: NFS boot issues

    francis kumar
    Hi Gururaja , Those environment variables are old one. As per your suggestion, i have modified the same thing but i got the same message: omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) eth0: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=1:00, id=7c0f1) IP...
    on May 26, 2011

  • Forum Post: Re: NFS boot issues

    francis kumar
    Hi, I have tried as per your suggestions.I am facing again nfs issue. The file system had downloaded from TI. I untar the files system in :/home/kumar/AM1808/filesys directory. Filesystem : arago-demo-image-da850-omapl138-evm.tar root@ubuntu:/home/kumar/AM1808/filesys# ls -l total 68 drwxrwxrwx...
    on May 27, 2011

  • Forum Post: Re: NFS boot issues

    francis kumar
    Hi, I have added in my bootargs. Still it is showing error as rpcbind: server 192.168.1.200 not responding, timed out Bootargs setenv bootargs console=ttyS2,115200n8 noinitrd rootdelay=4 rw ip=192.168.1.100:192.168.1.200:192.168.1.1:255.255.255.0::eth0:off root=/dev/nfs nfsroot=192.168.1.200:/home...
    on May 27, 2011

  • Forum Post: need help with u-boot 1.3.3 for L137 EVM

    BenjaminRTC
    I have successfully flashed the u-boot binary (1.3.3) that is distributed with the TI LSP into my OMAPL137 EVM and am able to use it to boot Linux. As I am progressing on a new board design it is becoming necessary to make some modifications to u-boot to support some minor hardware differences. Before...
    on Jun 13, 2011

  • Forum Post: u-boot splash screen image

    hakan ��zcan
    Hi everyone, I have am3517 based TAM3517 ( http://www.technexion.com/index.php/products/arm-cpu-modules/ti-sitara-am3517/tam-3517 ) and i want to add a splash screen image. I mean, i want to show some image while my device booting. since i am a newbie, is there anyway to do that ?
    on Apr 30, 2012
1234

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use