TI E2E Community
Multimedia Software Codecs
Multimedia Software Codecs forum
Example for AER using .WAV
I know that teh AER for C6747 supports u law, a law and 16bit PCM.The readmegui.txt in c:Program FIles\Texas Instruments\aer_674le_obj_15_1_10_3\tools\drc_tool says that
.wav file is supported. Could you please provide an example of AER that uses .WAV file as input and output instead of using .PCM file? The present example in 18.104.22.168 uses PCM file as input and output.
Does the AER for C6747 support .wav file format?
Does the AER for C6747 support .wav file format? I am looking for this option because, at the moment I have a ccsv4 code that does the following: there is a DSP (which is EVMOMAP L137/c6747) board and I have a windows 7 PC. The DSP and PC are connected via ethernet cable. I speak from the MIC of the PC and this is transmitted via UDP to DSP board at 8KHz sampling rate. The DSP board takes this and plays out in the speaker connected to the DSP board (which is EVM OMAP L137/C6747). Cant I just insert the AER where the DSP gets the input via UDP? that is, DSP gets input via UDP, passes this through the AER and output of AER is played out to speaker out of DSP. Is it possible for me to do like this? Or, should the input be strictly .pcm format everywhere?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.