This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am working on ROI....Just to check how to work ROI, in your original full-feature usecase in IPNC RDK 3.8
I checked with ROI type = ROI_PRIVACY_MASK, & It works... I can see effect on streaming. (selected portion is MASKed)
1. With Other Type (like - ROI_BACKGROUND_TYPE & ROI_FOREGROUND_TYPE), Not able to see effect on video or streaming. How can i do?
2. I want to also implement ROI as a CROP..... Means only selected portion is visible and other is not visible...Like reverse of ROI_FOREGROUND_TYPE.
How can I implement ?
Is there any patch for driver, then please provide us.
Thanks & Regards,
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Veeranna Hanchinal:
In reply to sandip gokani:
Yes, I agree with your point, that apply privacy mask for regions around interested area, your interested area will not get mask.
My Point is to invert of Privacy Mask.....Is there possible by providing any patch for encoder?
One more query,
As you replied me that "ROI Type like ROI_BACKGROUND_TYPE & ROI_FOREGROUND_TYPE will be used to increase or decrease the video quality. They will not mask the video. They changes the Qp of ROI".
So, Its possible that only selected area is focused only by above ROI type..
Require one more help for ROI.
I set ROI on Video Frames with appropriate X, Y, Width and Height and its working good with resolution 720x480 on stream2.
Now, If I changed resolution dynamically then ROI is not changed according to new Resolution.
I have did same with privacy masking ....
you can see on link : https://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/t/404781
But not able to do same for ROI (encoder side).
Can you please help on this?
Can you more elaborate on this with example. How dynamic change in Widht & Height will effect ROI unless ROI co-ordinated changes.
If you don't change the ROI co-ordinated, it remains in its places irrespective of resolution.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.