GetAVData() usage on IPNC

Tracy lee

Hi all:

As we know, wis-streamer will call GetAVData() to get the H264/MPEG4/JPEG data from av_server, but the usage in Appro_interface.h is too simple for us to use these APIs, Could anyone help provide more detail? or provide a sample code for how to get MPEG4/H264/JPEG data from av_server individually?

Thanks.

over 14 years ago

0 Anshuman Saxena over 13 years ago

TI__Mastermind 19985 points

Tracy,

This is an old post and i believe it has been answered either through different forum thread or through local FAE support. Can you please confirm if this still need to be kept open? Also, can you please post the answer here so that others can also benefit from this?

Once you confirm, we will mark this post as closed.

Regards,

Anshuman

0 Alex60591 over 13 years ago in reply to Anshuman Saxena

Prodigy 60 points

Hi Anshuman,

I am also looking for the same... couldn't find example code for H.264. Do you have any link for this answer??

Tracy, did you get any example code for H.264???

Thanks in advance!!

Kind Regards,

Alex

0 Jayakrishnan over 9 years ago in reply to Anshuman Saxena

Expert 2790 points

Hi Anshuman

I am experiencing some issues in the usage of GetAVData(). Pls check the below thread.

http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/717/p/361735/1274812.aspx#1274812

Best regards

Processors

Processors forum

GetAVData() usage on IPNC