TI E2E Community
Am1808 Starterware v1.0.3 usb problem
I debug usb-serial demo in starterware 1.0.3 on the xlt1808(the same as LOGICPD Kit), In windows xp , The pc can't recognize USB devices, can't get the vid and device id of the device; In windows 7, The pc can get the vid and device id,but setup the usb-serial driver error form "AM1808_StarterWare_1_00_03_03\tools\usb_inf“,who can give me some good idea?
who can give me light? run the example usb_dev_serial in the starterware 1.0.3 ,the pc can't detect the usb device. the hardware manager indicate "unknow device",and can't get vendor id and device id.
Similar issue has been observed when the examples were built using TMS470 tool chain (http://processors.wiki.ti.com/index.php/StarterWare_01.00.03.03_Release_Notes#Known_Issues_and_Limitations: SDOCM00080255).
If you are using TMS470 tool chain, please check if using CodeSourcery GCC tool chain helps.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.