Hi;
Could someone point me to a tutorial to write my starterware application in EMMC memory. I intend to use the EMMC memory to store my application and boot, I will not use the uSD for this, because it is a design requirement.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi;
Could someone point me to a tutorial to write my starterware application in EMMC memory. I intend to use the EMMC memory to store my application and boot, I will not use the uSD for this, because it is a design requirement.
Thanks
Hi Matheus,
Please see the link:
http://software-dl.ti.com/dsps/dsps_public_sw/am_bu/starterware/latest/index_FDS.html
BR
Ivan
Hi Ivan,
I have not found what I was looking at this link, there are only instructions to boot from sd card, creat a sd card, but I want to record boot and application in EMMC memory. I Read the Quick Start Guide and I have not found instructions for BEAGLEBONE Black.
Thanks
Hi Matheus,
Please see the links:
http://processors.wiki.ti.com/index.php/StarterWare_01.10.01.01_User_Guide#Inter-Processor_Communication_.28IPC.29_and_IPClite
http://e2e.ti.com/support/embedded/starterware/f/790/t/180133.aspx
http://e2e.ti.com/support/embedded/starterware/f/790/p/145172/526320.aspx#526320
But for more information please refer to the starterwere forum:
BR
Ivan
Hi,
To flash linux: http://processors.wiki.ti.com/index.php/Sitara_Linux_Program_the_eMMC_on_Beaglebone_Black
Someone knows a way to do the same with Starterware ?
Thanks in advance.
Once again: it does not work with Starterware as long as you do not implement eMMC support in HSMMCSD-library!
You of course can use a Linux-distri to copy your MLO and APP to eMMC but then it will not work since the MLO can't load the APP fro mthere!