This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

StarterWare on MYD-AM335X Development Board ( MYIRTECH )

Other Parts Discussed in Thread: AM3359

Hello ,


I have to use StarterWare on my MYD-AM335X Development Board ( from myirtech at http://www.myirtech.com/list.asp?id=466 ) the processor is AM3359 . I researched and found people talks about using StarterWare on beaglebone or EVM , I did not found anything for custom designs or specially for my development board . I sent 4 emails to myirtech support team and unfortunately they did not answered . ( amazing support team ! )

is it possible to use StarterWare on MYD-AM335X ? if yes , how to boot it from uSD card ? and where to get start ?

Best Regards,

Amir .

  • I'd guess it is possible to use Starterware on this board but it will be up to you to get it working. From the webpage you linked here I only can see that it is using DDR3, so you can start with the related initialisations from BeagleBone Black. For support of all remaining hardware you may have to check exact specifications of your board and adapt Starterware code (and initialisation) accordingly.

    Booting from SD-card is the more interesting thing, here you have to check if your board comes with an own BIOS-like thing or if it still uses the CPU's capabilities to boot from NAND/SD-Card.