Build driverlib

Bin Guo

I was following the instructions from this website for building driverlib:

http://processors.wiki.ti.com/index.php/Creating_TI-RTOS_Projects_for_Other_MSP430_Devices

But the problem is my ccs version is 6, and I cannot find the file "xdctools_3_25_04_88" to perform

..\xdctools_3_25_04_88\gmake.exe -f tirtos.mak drivers


These are all I have in ti folder.

This is my first time to touch this field, could someone can help me to solve it?

over 9 years ago

Steven Connell over 9 years ago

TI__Mastermind 45025 points

Hi Bin Guo,

The document you are reading is referring to a slightly older version of XDC Tools. Based on your screen shot, you should be able to find gmake.exe under xdctools_3_30_01_25_core.

In general, you should be able to substitute the version of XDC Tools mentioned in the steps of the document with either of the versions you have in your screen shot above.

Steve

Steven Connell over 9 years ago in reply to Steven Connell

TI__Mastermind 45025 points

Hi Bin Guo,

Were you able to get past the above issue? If so, would you mind please marking the post as "verified" for closure?

Thanks,

Steve

Processors

Processors forum

Build driverlib