Getting started with TI-RTOS on cc2650.

Puneet Sharma15

Other Parts Discussed in Thread: CC2650, BLE-STACK

Hi, I am a beginner in this. I want to have some guidance on what approach i should follow to understand the overall functionality and system functionality while using the TI-RTOS on cc2650. Also I want to build one of my application on cc2650 using RTOS, so how and where from i should start to have a better grip on the understanding and building.

over 7 years ago

0 Michel Solecki over 7 years ago

Mastermind 8415 points

Hi Puneet,
I would recommend downloading one of the available stacks for the CC2650. These stacks also provide sample applications which should be a good place to start. They both use

For the BLE-stack:
www.ti.com/.../ble-stack
For the TI-MAC stack:
http://www.ti.com/tool/timac

BLE stack is supported by both IAR and CCS.
Please note that TI-MAC only runs with IAR workbench.

Good luck.
Michel

0 Puneet Sharma15 over 7 years ago in reply to Michel Solecki

Intellectual 390 points

Can I add the BLE-stack extension using the App center in CSS on LINUX based system?

0 Michel Solecki over 7 years ago in reply to Puneet Sharma15

Mastermind 8415 points

I am not sure how you would include the BLE stack in an existing project, but it would be much easier if you would just start with the sample application that comes in the BLE stack, which you can import or open in CCS.

If you have any problems, you can post more specific questions in the BLE forum (or Mesh networks if you want to use TI-MAC stack).

Processors

Processors forum

Getting started with TI-RTOS on cc2650.