TI E2E Community
OMAP L-138 WinCE BSP question
I have a question regarding to the revision of OMAP-L138 BSP for WinCE. I noticed there are 3 different revisions: BSP_WINCE_ARM9 01_00_01, BSP_WINCE_ARM9 01_00_02 and BSP_WINCE_ARM9 01_10_00. I downloaded BSP_WINCE_ARM9 01_10_00 and installed it. When I tried to rebuild the sample OS – OMAPL138_AM18X_SAMPLE following instructions of Quick Start Guide, it gives me error in the end. Would you please help me through?
Please refer to this post to see if it helps.
Sorry. The link refers to a TI internal forum which is not visible outside.
Here is the content of that post."Please refer to SDOCM00082755 and SDOCM00085366 at this link for a workaround."
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.