1220.lcdOnOff.zip
Hello,I have encountered the problem that the system hangs up when I run the "LCD on and off" repeatedly.
I am using following environments: - WINCE_SDK 01_01_00_Patch01 - AM3517EVM
It is occurred on WinCE demo kernel image(NK_demo.bin) on AM3517EVM.And, it takes several minutes or about 1hour. But, the problem always occurs.I think the incidence rate depends on kernel image.
I would like to clarify if this is a issue of WinCE BSP.And, how can I avoid this problem?
I would like to attach the simple source code and Exe file.You can see the problem following procedure. 1: Boot WinCE on AM3517EVM 2: Run the LcdOnOff.exe (LCD On/Off start) 3: During 1 hour LCD On/Off program hangs.
Could you confirm the problem on your EVM and WinCE?And, please advice me.
Best regards,RY
This problem has been observed on our side as well and minimized to the lowest reproduction rate we could achieve. The issue seems to come from the initalization process of the LCD panel, but we don't have information accurate enough regarding this sequence to check that we match the requirements from the vendor.
Adeneo Embedded Support teamContact us at sales@adeneo-embedded.com
Hello, Adeneo support team.
Thank you so much for your reply.We had send another email to your company.And, your company had respond us that to debug about this.I would like to wait for feedback of debugging.
Thank you for your support!