TI E2E Community
Production installation of OS into NAND flash
TI or Adeneo,
AM1808, WinCE 6.0 v1.10
Is there a way to install the WinCE OS into NAND flash without using Visual Studio and Platform Builder through EMAC?
I tried using the EBOOT setting “Write Download RAM NK to flash” when booting from the SD Card instead of from PB. This didn’t write to NAND flash.
I enabled the NAND file system to see if storing the OS as a file would do the trick, but it appears that the file system space is separate from the OS storage space in NAND flash.
Our design requires the OS to be in NAND flash. Right now the only way I know to install the OS in a production setting is to use PB.
Is there any better way to accomplish this task?
The better option I can think of is flashing from SD Card.
Check the following URL: http://cedownloader.sourceforge.net/
Still it needs a Host PC and Ethernet Cable, but PB can be excluded.
That works perfectly. Thank you very much.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.