WinCE

Browse by Tags

WinCE

Welcome to the WinCE Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
AM3517
Related Posts

  • Forum Post: Re: Adeneo FTP address ?

    Jatin Jain
    Okay. The BSP is still not available for general download. But since you have build 9, I would recommend using the same channel for the updated release as well.
    on Aug 5, 2010

  • Forum Post: Re: Adeneo FTP address ?

    Gary Tominovich
    The latest version is BSP_WINCE_ARM_A8-1.00.00.11. However, it is only available for limited access via a password-controlled FTP site. You can acquire it from the same location as from where you downloaded the 1.00.00.09 build. If you're not sure of where that is or have forgotten the credentials...
    on Aug 5, 2010

  • Forum Post: How to init the WIFI in AM35XX EVM

    gang luo
    hi,dear friends, I need wifi in the 35XX EVM. But I found no driver in the BSP as in the AM35x BSP User Guide. Does anyone provides me some Materials on how to init the wifi and related driver? thanks very much....
    on Aug 13, 2010

  • Forum Post: WinCE6R3 demo NK.bin use with C#

    richard neveau
    As far as I can tell none of the new (or old) demo NK.bin's for AM3517 EVM support code development with C#. Looks like the cab file with .NETCF 3.5 update doesn't work when Visual Studio tries to load it and it is not part of the build. I have Active Sync working and device setup done. Just...
    on Dec 22, 2010

  • Forum Post: Invalid flash address error

    Feng Jiang
    Hi, I got the following error when booting the Wince BSP for logic AM3517 exp board. I did not change any of the default BSP settings, only changes are in the Wince applications, any idea what might going wrong? Init HW: controller RST SDCARD: reqested speed 1000000, actual speed 1000000 SDHC: command...
    on Jan 8, 2011

  • Forum Post: Touch screen and AM3517 Experimenter using WinCE

    Clinton Van Zyl
    I have connected a LCD-6.4-VGA-10R display (from Logic) to an AM3517 Experimenter board (from Logic). Using the TI supplied WinCE BSP (BSP_WINCE_ARM_A8_01_01_00) I have modified the /*OMAP_LCD_480W_272H*/ parameters in C:\WINCE600\PLATFORM\AM35x_BSP\SRC\BSP_COMMON\DISPLAY\lcd_vga.c to use the 640x480...
    on Mar 30, 2011

  • Forum Post: errors when building BSP_WINCE_ARM_A8_01_02_00_Source.exe for EVM 3517

    Alex Wang68140
    Dear, I try to build a latest version of BSP but failed, the error messages is: BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Build started with parameters: BUILD: [00:0000000001:PROGC ] Build started in directory: C:\WINCE600\PLATFORM\COMMON\src\soc\COMMON_TI_V1\AM3517\EMAC...
    on Jun 8, 2011

  • Forum Post: Multimedia codec solution of Windows CE6.0 and compact7 on AM35x

    RY9983
    Hello. I am looking for multimedia codec of Windows CE6.0 and compact7 on AM35x. And It is preferred that it support for Neon. Could you let me know about the codec and the 3rd Party? Best regards, RY
    on Aug 22, 2011

  • Forum Post: Does WinCE6.0 BSP EMAC driver support operation of 10Base-T on AM3505?

    RY9983
    Hello, I am evaluating AM3505 on WindowsCE6.0 with WINCE_SDK 01_01_00_Patch01. Although I would like to operate EMAC via 10Base hub, it have failed on AM3517EVM. (I can access the network via 100Base hub.) - Does WinCE6.0 BSP EMAC driver support operation of 10Base-T on AM35xx? Best regards...
    on Oct 31, 2011

  • Forum Post: WEC7 Memory Leakage

    jojo tai
    Hi, I use AM3517EVM and WEC7, and found memory loss problems. I use C # to write a small program to reproduce this problem. The program includes twenty Label with a Counter and Timer. In every Time Tick Counter++, and display on the Label. In this way memory is consumed very quickly. ...
    on Dec 19, 2011

  • Forum Post: when we are trying to paint continuously on screen with help of DirectDraw then CPU utilization reached 100%and the whole systems gets hanged.

    Nishikant Diwathe
    I have Am3517 Windows Embedded compact 7 BSP I am facing an issue with display driver, i.e. when we are trying to paint continuously on screen with help of DirectDraw then CPU utilization reached 100% and the whole systems gets hanged. We have observed this issue with sample application which...
    on Feb 7, 2012

  • Forum Post: The system hangs up during LCD on/off on AM3517 WinCE6

    RY9983
    (Please visit the site to view this file) Hello, I have encountered the problem that the system hangs up when I run the "LCD on and off" repeatedly. I am using following environments: - WINCE_SDK 01_01_00_Patch01 - AM3517EVM It is occurred on WinCE demo kernel image(NK_demo.bin) on...
    on Mar 5, 2012

  • Forum Post: TI WinCE6 BSP 6.15: Data Abort error when accessing INTC register

    Hans Huang
    We upgraded our device from TI BSP 6.13 to 6.15 recently. We did not see this data abort when using 6.13. The processor is TI AM3715 ES1.2 @ 800MHz (and OMAP3530 / DM3730 as well). The data abort happened when resuming, and ramdomly happened when accessing the INTC register in OEMInterruptHandler...
    on Mar 7, 2012

  • Forum Post: HOWTO Activate UART4 is AM35x_BSP ?

    Hannes Brockmann
    We have to use the UART4 device of the am3517. Out basic BSP is AM35x_BSP. So we tried to modify it, but until now I does not work: - in bsp_padcfg.h we have defined a new Group #define UART4_PADS \ PAD_ENTRY(CCDC_FIELD,INPUT_DISABLED |MUXMODE(2)) \ PAD_ENTRY(CCDC_HD, INPUT_DISABLED |MUXMODE...
    on Mar 8, 2012

  • Forum Post: How to control the SYS_CLKREQ?

    challenger002
    I am using the Windows Embedded Compact 7 on the AM3517EVM. I want to stop the external clock while suspending the system. What should I do to control the SYS_CLKREQ? Best regards, Daisuke
    on Mar 13, 2012

  • Forum Post: CAN RX Interrupt Configuration : AM3517

    hrishikesh choudhary
    Dear All, I have configured the Receive interrupt for CAN. Flow of Program : 1. Initialise CAN . 2. Setup Transmit/Receive Mailbox. 3. I have configured Mailbox 1 as transmit ..MID 0x15AC0000..Data Length : 4. 4.Mailbox 0 as Receive Mailbox. MID 0x1CA00000..Data Length : 4. 5...
    on Mar 17, 2012

  • Forum Post: How move UART2 to MCBSP3 pads AM3517 WEC7

    Andrew Efremov
    I am try use UART2 on my custom board on MCBSP3 pins. for it i am remaked bsp_padcfg.h like this: //#define UART2_PADS \ // PAD_ENTRY(UART2_TX , INPUT_DISABLED | MUXMODE(0)) \ // PAD_ENTRY(UART2_RTS, INPUT_DISABLED | MUXMODE(0)) \ // PAD_ENTRY(UART2_CTS, INPUT_ENABLED | PULL_RESISTOR_ENABLED |...
    on Apr 12, 2012

  • Forum Post: Re: How move UART2 to MCBSP3 pads AM3517 WEC7

    Andrew Efremov
    (Please visit the site to view this file) Hello thanks you for answer. i am trying add some debugging code in function HWOpen() i add this code in pdd.c (wince700\platform\common\src\soc\COMMON_TI_V1\COMMON_TI\SERIAL\UART\pdd.c): // configure uart port with default settings SetBaudRate(pPdd, pPdd->dcb...
    on Apr 16, 2012

  • Forum Post: AM3517 EVM NAND Booting and Splash Screen (Logo.bmp)

    David Lorek
    I've been able to boot my device from NAND, but I don't know how to get the Logo.bmp into NAND so that a customized splash screen is shown instead of the four color pattern. Is there a utility I can use to put the Logo.bmp into NAND? Do I need to modify the bootloader to copy the Logo.bmp when...
    on Jun 28, 2012

  • Forum Post: Craneboard WinCE

    Rodolfo Solera
    Has anybody been able to install and run WinCE on a Craneboard? I havent seen a specific BSP for the Craneboard but I wonder if someone was able to make it work. Thank you
    on Jul 17, 2012

  • Forum Post: WinEC 7 AM35x lcd driver rotation problem

    Andreas Geisreiter
    Hello, I'm using the Adeneo BSP for TI AM35x. The LCD driver supports screen rotation via setting [HKEY_LOCAL_MACHINE\System\GDI\Drivers] "Angle" to 1 for 90°. It works, but the screen is flickering and I get the debug message: DSS pipeline underflow error . Intrstatus : 40 ...
    on Nov 8, 2012

  • Forum Post: Video playback perfomance drops with increasing video resolution -wince7- AM3517

    kiran TG1
    Hi, We are trying to play video files on Wince 7 on Logic PD Zoom AM3517 EVM . We have noticed that when we increase the video resolution for a given video file , the frame rate is dropping. For eg: When we play a video of 320x240, 30 FPS video Its playing fine. However when we double the resolution...
    on Jan 3, 2013

  • Forum Post: wince i2c driver

    janne gershman
    Hello, I want to change i2c frequency, but i can't find i2c driver. what is driver name? how can i change the frequency? thanks in advance, Janne
    on Feb 27, 2013

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use