Part Number: TPD5S116
My customer has question below;
TPD5S116 VIL requirement is -0.5V ～ 0.082*Vcca.(0.246V @vcc=3v)That means output voltage of RK3399 should be under 0.246V to input signal low for TPD5S116.
So strictly speaking, there is possibility for TPD5S116 to judge it high level if output voltage of RK3399 is over 0.246V.
Otherwise, RK3399 VOL spec. is ～0.375V.That means there is possibility to be up to 0.375V for output voltage of RK3399.
Are there any other means to help solving problems?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Chuck Branch:
Do you have any substitute components of TI product? (VIL>0.375V)
In reply to John Lin41:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.