Please can you help me with my below query.
I will be using only TUSB7320 chip and have no plan to move to TUSB7340.
As per datasheet B4, B26 and B8 pins are no connect. But in reference schematics B4 and B26 are connected to 3.3V and B8 connected to 1.1V.
Is the above connection required? is there any explanation for this connection?
Can I make B4, B26 and B8 pins are no connect?
Please follow the data sheet.
B4, B8 and B26 are NC for the TUSB7320.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.