• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 339 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TL16C2550 & 1.8V MCP(NAND flash + DDR SDRAM)

Kiyoung SON
Intellectual 515 points
Other Parts Discussed in Thread: TL16C2550

Dear TI-er.

My customer is designed TL16C2550 & MCP.

How it is working this circuit ?

Plz help me.

  • 0
    TI__Mastermind 36085 points
    Hello,

    So basically, the device must be connected to the controller by means of the parallel data bus (please see the TL16C2550 Block Diagram and pin functions, datasheet page 4), and the customer only have to configure all the internal registers for the desired settings and that's it. For normal operation you only have to write data to the THR register in order to transmit it, meanwhile the data reception is done by reading the RHR register and attending the status and/or the interruptions generated by the TL16C2550. Please review the application information and the principles of operation for a detailed description.

    Best regards,
    Diego.
  • 0 in reply to Diego Cortes
    TI__Mastermind 18655 points

    Hello, 

    Please, take a look at the attached documentation.

    Regards,
    Joel 

    UART cheat sheet.pptx

    UARTs Overview (3).pptx