What is the recommended EEPROM Programming tool for TUSB8020?

Destin Yue

Other Parts Discussed in Thread: TUSB2046B

I've decided to use EEPROM on TUSB8020 to load my own VID. So I need to program the EEPROM. I found a related link on E2E forum: Program Serial EEPROM Connected to TUSB8020 USB HUB

There is a EEPROM programming tool mentioned in it. But i want to know is what this tool is. Could you send me the name of this tool or a link?

over 7 years ago

0 Elias Villegas M. over 7 years ago

TI__Guru* 76130 points

Hello,
Please provide an email address so we can send you the tool.
Regards

0 Destin Yue over 7 years ago in reply to Elias Villegas M.

Intellectual 270 points

Elias,

Thank you very much! My email address is: destin.yue@arrowasia.com

0 Destin Yue over 7 years ago in reply to Elias Villegas M.

Intellectual 270 points

Elias,

Thank you very much. I've received this tool.

0 Jens Eckartsberg over 7 years ago in reply to Elias Villegas M.

Prodigy 10 points

Hello Elias,

I need a tool to programm the EEPROM with the TUSB2046B.

My email adress is jens.eckartsberg@zeiss.com

Thanks

0 Elias Villegas M. over 7 years ago in reply to Jens Eckartsberg

TI__Guru* 76130 points

Hello,
We don't have a tool for the TUSB2046B, you may use a standard I2C master (aardvark)
Regards

0 bati ju over 6 years ago in reply to Elias Villegas M.

Prodigy 10 points

Elias,

I've decided to use EEPROM on TUSB8020/TUSB4020 to load my own VID. So I need to program the EEPROM.

There is a EEPROM programming tool mentioned in it. But i want to know is what this tool is. Could you send me the name of this tool or a link?

Thank you very much! My email address is: xuehua.ju@honeywell.com

0 Joel Jimenez0 over 6 years ago in reply to bati ju

TI__Mastermind 18655 points

Hello bati ju,

Thanks for your message. We will send you the tool as requested.

Regards,
Joel

Interface

Interface forum

What is the recommended EEPROM Programming tool for TUSB8020?