Our customer is using the XIO2001 BSDL file with their JTAG tool. They are stating that the BSDL file only works in Bypass mode.
My questions is does it work in other modes?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Our customer is using the XIO2001 BSDL file with their JTAG tool. They are stating that the BSDL file only works in Bypass mode.
My questions is does it work in other modes?
Dennis,
Here is our customers issue:
When the Texas Instrument part ( XIO2001 PCI Express® PCIe to PCI Bus Translation Bridge) is not in BYPASS mode, I get an IR failure (no error message displayed on the screen) during the Infrastructure Test. When I put the TI part in BYPASS mode, Infrastructure Test is passing.
Hello John,
Could you please try the following bsdls file.
6864.8726.XIO2001 BSDL 11-14-2011.zip
it is a little bit different than the previous one that Dannis sent you.
Regards,
Roberto