TMDS171: Input inter-pair skew tolerance

Domenico Mancusi

Prodigy 100 points

Part Number: TMDS171

Hallo,

what are the Data Rate and Clock Rate wich the specified input inter-pair skew tolerance value of 1.8ns refers?

1.8ns value is an absolute value, is it possible to refer the value to the Pixel Clock?

Thank you.

Mancusi Domenico

over 6 years ago

0 Moises Garcia over 6 years ago

TI__Mastermind 23815 points

Hi Domenico,

Take this parameter as the maximum supported skew independent of the pixel clock.

Regards

0 Domenico Mancusi over 6 years ago in reply to Moises Garcia

Prodigy 100 points

Hi Garcia,
in my opinion 1.8ns of inter-pair skew delay have a different impact and limitation on the system,
we are working on a 110MHz pixel clock and I suppose a different response respect to 340MHz clock,
so it's more important to know if my application is limited by the attenuation or the inter-pair skew delay values of the cable we are using,
do you agree?

BR

0 Moises Garcia over 6 years ago in reply to Domenico Mancusi

TI__Mastermind 23815 points

Hi Domenico,

inter-pair skew is usually not mentioned, the cables should follow different parameters.

Regards

Interface

Interface forum

TMDS171: Input inter-pair skew tolerance