I'm confused. You offer a Picostar package for the TPD2E007 device and this is the package that is currently available from distributors. But the datasheet is woefully inadequate for specifying the package.
1. It says ball size is nominal 0.2mm, pitch 0.4mm, but doesn't suggest a land size for the PCB.
2. It says size of the package is D x E. It says D and E can be found in the datasheet. The datasheet includes a picture on the front that says "0.8mm x 0.8mm package" - but that's not part of a mechanical drawing!
Could I please have a drawing for the Picostar package that I can use with confidence, including PCB land pattern arrangement, etc.
Thank you for bringing this to our attention.
We will revise the mech drawing asap and get back with you.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.