I can see on the datasheet that it supports 400-kHz Fast I2C Bus operating. And all through the datasheet they only mention that frequency.
Is it a given it works with others too? (I need it to work at 100Khz for my bus).
That should fine. The repeater itself is agnostic to the actual bus frequency. The limiting factor for the bus frequency is determined by the time-of-flight delay through the repeater. This just means that you can't operate the bus too fast, otherwise, the repeater delays might introduce setup/hold time issues.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.