TPL0102

sakthivel s

Intellectual 620 points

Sir,

Is it possible to use one channel for voltage divider and one channel for variable resistor.

over 8 years ago

0 Joseph Wu over 8 years ago

TI__Guru* 92715 points

Sakthivel,

I'm moving this post to the I2C Forum under /etc Interface. I've seen this questions about this device answered here.

Joseph Wu

0 Jonathan Valdez over 8 years ago

TI__Genius 16430 points

Hello Sakthivel,

Yes, it is acceptable to use the TPL0102's channels as you describe, so long as you take care not to violate the maximum voltage applied to the pin or the maximum current through the device.

The TPL0102's channels are independent of each other.

Regards,
Jonathan

Interface

Interface forum

TPL0102