do we have level shifterdedicated for NAND FLASH (to use with NAND FLASH 3V, AND CPU 1.8V),or need std level shifter like SN74LVC8T245?
Thanks for your inquiry.
Yes, you are right, we don't have the special design for the NAND FlASH interface. but you can use the std Level shifter.
For your application, I recommend you to use the SN74AVC8T245 or SN74AVC16T245. These parts can work at 1.2V to 3.6V power supply and have better performance than LVC part especailly for the propgation delay and data rate. Please think about your Data speed and choose the parts.
Any further question, please let me know.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.