Recommended solution for voltage translation

Marjorie

Other Parts Discussed in Thread: SN74LVC8T245

Hi,

I need to translate 6 logic signals from (2.5V / 3.3V / 5V) to (5V), uni-directionally. The incoming logic signals will not have a supply reference, only the output will be referenced to +5V. Can you recommend a solution?

Thanks,

Marjorie

over 8 years ago

0 Emrys Maier over 8 years ago

TI__Guru* 96591 points

Moving to voltage translation forum for best support.

0 fhoude over 8 years ago in reply to Emrys Maier

TI__Genius 17205 points

Hello Majorie,
I have a couple of questions for you. What is your application? Do you need high speed?

0 Marjorie over 8 years ago in reply to fhoude

Prodigy 105 points

Hi,
I actually found a solution earlier today - thanks!
Kind regards,
Marjorie

0 fhoude over 8 years ago in reply to fhoude

TI__Genius 17205 points

Given the limited information about the application I would suggest using the SN74LVC8T245. It is 8 bit so you will have to tie two inputs to either hi or low.

Logic

Logic forum

Recommended solution for voltage translation