SN74AVC4T245 - the max output rise/fall time

Michael Parkanski

Prodigy 375 points

What is the max output rise/fall time for this part?

over 13 years ago

0 Chris Cockrill over 13 years ago

TI__Mastermind 46480 points

Hello Michael

The output rise and fall time will depend on the load conditions. It will also depend on the Vcc on the output side. the lower the Vcc the less the drive and the slower the edge.

0 dtluigi over 7 years ago in reply to Chris Cockrill

Intellectual 595 points

Hello Michael
can you provide us a formula or anything else useful to estimate the max rise/fall time?
This information is not present in the datasheet of the part. I have a 3,3V on the Vccb side.

Logic

Logic forum

SN74AVC4T245 - the max output rise/fall time