This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

No pinout description for SN75155 on datasheet

Other Parts Discussed in Thread: SN75155

Please provide a pinout description for the SN75155 part.  There is not one on the datasheet and the letters are not very intuitive

Can you also provide a typical circuit schematic on how it connects to RS-232 port

  • Eduardo,

    1 VCC- needs a -12V power supply
    2 DA is a TLL input for the RS-232 driver
    3 RY is a TLL output for the RS-232 receiver
    4 GND connects to ground
    5 RA is the RS-232 receiver input
    6 RTC is the receiver threshold control pin, just leave it unconnected.
    7 DY is the RS-232 driver output
    8 VCC+ need a +12V power supply