DP83848C: Strapping of Auto-Negotiation and mode select options

Ruslan Khalidov

Part Number: DP83848C

Is RESET pulse required at power up for strapping of Auto-Negotiation, AN0/AN1, and MII MODE SELECT options or it happens automatically (internally) at power up?

over 6 years ago

0 Rob Rodrigues over 6 years ago

TI__Mastermind 19780 points

Hi Ruslan,

There is an automatic RESET pulse at power up. This is referred to as POR. An external RESET pulse is not required at power up for strapping.

Best Regards,

0 Ruslan Khalidov over 6 years ago in reply to Rob Rodrigues

Prodigy 50 points

Thank you Rob.

Interface

Interface forum

DP83848C: Strapping of Auto-Negotiation and mode select options