This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: DS125BR820
Our customer Block diagram as below.
Power on system can be run PCIe gen 3, but Run for some time down to Gen1 speed.
For this application have any concern? or any suggest share for me?
I do not have any specific issues with the PCIe topology shown. Do you know the attenuation characteristics associated with each channel segment.
For this type of application I would recommend to start testing using a relatively low CTLE and VOD setting on the DS125BR820.
Do you know the TX FIR settings of the other components in the system?
Thanks and Regards,
In reply to Lee Sledjeski:
if connector & PCB trace & cable Loss is 15~18dB, Through the way of DS125BR820,How many DS125BR820 units In series?
In reply to Hugo Liu:
I would only recommend one (1) DS125BR820 be used on the PCBA channel and one (1) DS125BR820 be used on the PCBB channel as you have shown in the block diagram. If the channels on either side of the IDT device are just ~ 15-18 dB, I would recommend to use CTLE "Level 2" and VOD "Level 3" in the datasheet.
We do not recommend cascading multiple repeaters within a single PCIe channel.
What are the current DS125BR820 settings? It is possible the links are over-equalized.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.