This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TLK106
I connected the device (via RG45 transformer XFMATM9) to Laptop.
The LED_LINK pin is on but the Link Status bit of the Status Register is 0.
The content of Status Register is 0x7849.
I tried also with loop back cable. Same occurrence.
Can you please advise me?
EFL (Ethernet & FPD Link) Applications Engineer
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Rob Rodrigues:
Thank you for your reaspond.
This is a custom board.
Attached please find the schematic diagram of TLK106.
I read the register 0x1 repeatly and receive the same result.
In reply to Yacob Hassidim9:
I replaced the R324 by 4.86 KOhm.
I didn't remove the C184 yet.
Unfortunately the link status bit is 0 (while the LED link is on).
The value of status register is 0x7849.
I removed the C184 also.
OK, that was the first thing I saw was an issue. I'd like you to check the following items.
1. Look at timing of input reference clock PHY_2_CLK. If PHY_2_CLK is not stable when the TLK106 power comes up, you may need to apply a RESET pulse to the TLK106 to initialize properly.
2. Measure RBIAS voltage during normal operation (should be approximately 1.2V)
3. Remove L37 and replace with 0 ohm resistor
4. Ensure PFBOUT is ~1.55V +/- 5%
5. Put the TLK106 in digital loopback mode and check for a link up in register 0x1
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.