This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS2546EVM-064
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Donovan Porter:
Thank for your quickly reply.
I tried all jumper settings, but i only get the 500mA.
Today i ask Vuzix again for the B1.2. I await a reply.
Note that the data lines are switched on even while the TPS2546 does the CDP handshake. What does it mean? The STM is set by software to SDP with 21K pull down on the D+ and D-.
In reply to Thorsten Bursche:
Thanks for the scope captures. It doesn't seem like the Vuzix is doing BC1.2 detection. Please let me know what they say.
Page 27 of the TPS2546 datasheet section 8.4.3 explains what I was saying about the internal mux being switched on even when the TPS2546 is in CDP mode.
I do not think this will be an issue. The 21k ohm the STM datasheet recommends is for detecting USB2.0 speed of the device connected.
we still waiting on an answser from Vuzix about the charging mode.....
we figured out that it depend on the usb cable...... We changed from a no name usb cable to the "Vuzix" cable and we get more than 500mA charge current. So the stand alone mode is fine.
Now we connected the customer PCB with the stm to the TPS with the Vuzix. The current is ok (we charge the Vuzix before) but no data communication.
We scope the Start Up via Enable the TPS:
Without the TPS we scope this: SDP Mode
Do you have an idear what we are doing wrong?
Awesome! Glad you guys got it working.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.