This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: DS125DF410
is there any chance to get the PLL locked again after disconnecting and re-connecting the input signal?
So far everything works fine but after removing the input signal and re-applying it again I need to reset and reconfigure the IC by the SigCon Architect again (using DPS-DONGLE-EVM). Is this really required or is there a possibility to avoid this and re-start with the same configuration and same input signal?
Thanks and Best Regards,
This is not required. We do this quite often in the lab and have not observed this.
Could it be that at the beginning when the signal is getting applied for some reason transient confuses the retimer. How about if you turn off the power to the device, apply the signal, and then turn the power on. I am assuming this works right?
Another thing you can try is to force signal detect off, apply signal, and then turn signal detect on. Does this take care of the problem?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.