This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TRS3232E-Q1
in my application, an embedded electronic is communicating via a RS232 interface with a host PC. Currently, I'm using the TRS3232EQPWRQ1.
In some of your reference designs (e. g. TIDA-01094), I saw that you use an isolated RS232 communication. In TIDA-01094, you use the ISO7321.
There is no isolator in my design up to now. I just connected the UART port of my microcontroller directly to the TRS3232E.
When do you recommend to use this isolator?
Would I also need the isolator, if I would use the MAX3232MPWREP?
The isolation is needed if the ground of your RS232 transmitter and receiver has big shift, for example around ±10V for TRS3232E. TIDA-01094 gives a good example of isolated communication by measuring isolated shunt current. You can make your call if it has same requirement in your application. Please let us know if you have more questions.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Hao L:
so I understand that I need the isolation if I have e. g. two independent power supplies for receiver and transmitter.
Would I also need the isolator if I would use the MAX3232MPWREP?
In reply to Stefan Lehmann:
It would be same story. MAX3232 and TRS3232 have many similar electrical characteristics. Please let me know if you have any questions.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.