This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPD4E02B04-Q1
We will be using the FTDI FT601 chip to do the interfacing to the USB 3.0 bus. In our previous USB 2.0 design FTDI recommended also PulseGuard ESD Suppressors - PGB1010603 on the USB 2.0 DP/DM signals as well as 10pF Caps to GND. When I asked them about this requirement for this design using the FT601 they claimed that it was NOT necessary as a different PHY is being used. When I looked at the data sheet for the FT601 ESD and Latch-up Specifications :-
Human Body Mode (HBM) - JEDEC EIA/JESD22- A114-B, Class 2 - ±2kV
Machine mode (MM) - JEDEC EIA/JESD22- A115-A, Class B - ±200V
Charged Device Mode (CDM) - JEDEC EIA/ JESD22-C101- D, Class-III - ±500V
Latch-up JESD78, Trigger Class-II - ±200mA
In your opinion is this enough ? In the TPD4E02B04-Q1 data sheet they recommend on the USB 2.0 lines to use TPD4E05U06-Q1 ? What do you think ?
If we do use the TPD4E02B04-Q1 is there a reason why we couldn't use the TPD4E02B04-Q1 for the USB 2.0 lines \ CC lines instead of the TPD4E05U06-Q1 ?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Alec Forbes:
In reply to Shmuel Davis:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.