LMH1297: Questions about register map

Masazumi Ishii

Genius 3945 points

Part Number: LMH1297

Hello.

LMH1297 Programming Guide (SNAU 204 C)
I am watching.

I have something I would like to confirm in this document.

For details, please see the attached document.

Thank you.LMH1297Que1.pdf

over 5 years ago

0 Nasser Mohammadi over 5 years ago

TI__Guru* 88905 points

Hi Ishii-San,

Thanks for pointing this out.

P5 Section 3.1.1 that you have shown in your pdf file is incorrect P21 Section 3.15.3.2 is correct. Also, P39 section 4.3 is the register map and it correctly points to the register bit definition. Please follow P21 section 3.15.3.2 to power down OUT0. We will make this correction on next revision of LMH1297 Programming Guide.

Regards,,,nasser

0 Masazumi Ishii over 5 years ago in reply to Nasser Mohammadi

Genius 3945 points

Hello

thank you for your answer.

I understood that I am going to correct this difference.
Is there any other place to correct by mistake?
Please let me know.

Thank you.

0 Nasser Mohammadi over 5 years ago in reply to Masazumi Ishii

TI__Guru* 88905 points

Greetings Ishii-San,

Not that I am aware of. We have already made a note to correct this on next revision of the LMH1297 programming guide. I apologize for this inconvenience and please let me know if there is a question.

Regards,,nasser

Interface

Interface forum

LMH1297: Questions about register map