This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TUSB4041I: OTP programming procedure

Prodigy 205 points

Replies: 13

Views: 349

Part Number: TUSB4041I

OTP Programming details required:

1. How to program the OTP for TUSB4041 chip.

2. Any additional  Hardware /software tools are required for programming.?

3. We also want part  number for ordering the OTP version of above chip.

4. Any addtional lead time   of procurement OTP version of chip.

5.Our requirement is  Swapping  the pins of down stream ports.

6. Is it possible to program the OTP version chip on board after assembly.?

  • In reply to Wson99:

    Please accept my friend request and SEND ME A MESSAGE. The message is necessary so I know the request has been accepted and I will send the tool.

    Also, please confirm if you mean the OTPtool? Or EEPROM tool?

    Regards,
    JMMN
  • In reply to JMMN:

    I don't know how accept friend request, I just send friend request to you.

    I understand that I can use TUSB4041 without programming (without EEPROM), and when I want to setup register in TUSB4041, I need EEPROM. Is it right?
  • In reply to Wson99:

    This is correct. The TUSB4041 can be configured using on the pins, EEPROM is not required for standard functions. If you would like to customize the functionality of the TUSB4041 using an EEPROM you can adjust the registers documented in the datasheet.

    Regards,
    JMMN

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.