Part Number: TPS65987D
I have a requirement for TPS65987D (USB PD Controller). It is meeting all my requirement except temperature range.
As per the datasheet the temperature specifications is rated up to -10degC to 75degC. But I have a requirement from -15degC to 55degC. Can I still use the same for this negative temperature range?
As you mentioned, the TPS65987D is only recommended for us down to -10degC per the datasheet specification. If you operate the device outside of it's recommended condition, we cannot guarantee its functionality. It would be up to you to test and see if it is sufficient for your application.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Eric Beljaars:
Is there an equivalent part in Industrial or Automotive grade temperatures?
In reply to shyam jogi:
You can look at the TPS65981, it has an industrial temp range.
I had come across this but it appears that this chip supports USB PD1.2 rather than USB PD1.3.
That's correct. We do not have a PD3.0 solution with an industrial temp range.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.