This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LMH1297
Hello, I'm using the LMH1297 with Vin connected to 2.5V. I'm looking at the datasheet and wanted to know the max current draw on the Vin pin and need some guidance. Could use the worst case of 290mA fro the IDD_transcd found on page 9?
Yes. Please use 290mA and 2.5(+5%) for worst case current/power consumption across parts, supply and temperature.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Nasser Mohammadi:
Hello, 2.5 what? Little confused.
In reply to joe306:
I apologize for confusion. I was referring to the power supply voltage - 2.5V+/-5%.
Have a good day
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.