TPS65982: Billboard

Zoe Ko

Expert 3280 points

Part Number: TPS65982
Other Parts Discussed in Thread: TPS65988

Hi team,

Does the TPS65982 need FW for its billboard function?

Or how to build it if necessary?

Could you please help provide FW if need FW?

Thank you!

over 4 years ago

0 Gary Teng over 4 years ago

Genius 5190 points

Hi Sir,

It's Tapex creek's new design by using TPS65988 as PD and TPS65982 for Billboard. My customer want to know if 982 need FW for billboard function on external flash or not, and how to build its billboard function? Only open billboard function on GUI or?

Best regards,

Gary Teng

0 Adam Mc Gaffin over 4 years ago in reply to Gary Teng

TI__Mastermind 27525 points

Hello Gary,

Make sure that the BillboardAllowed bit from register 0x28 for the configuration tool to enable Billboard functionality

0 Gary Teng over 4 years ago in reply to Adam Mc Gaffin

Genius 5190 points

Hi Adam,

So we need a 982 as billboard with an external flash to have billboard function currently right? Use any version GUI to build is ok?

Thanks for your response.

Gary

0 Adam Mc Gaffin over 4 years ago in reply to Gary Teng

TI__Mastermind 27525 points

Hello Gary,

Yes, you would use the configuration as well as the external flash for billboard functionality. The following link help goes over billboard function

https://e2e.ti.com/support/interface/f/138/t/508958

Interface

Interface forum

TPS65982: Billboard