TUSB1064: EQ setting

Kawa

Prodigy 155 points

Part Number: TUSB1064

When EQ setting is I2C, must EQ_OVERRIDE always be "1"?

For example, should EQ_OVERRIDE be "1" even when changing the lane settings after EQ settings?

over 4 years ago

0 Malik Barton57 over 4 years ago

TI__Guru 64326 points

Hi Miya,

EQ_OVERRIDE should be "1" at all times to use the EQ vaules loaded into the EQ registers. I recommend leaving it 1 at all time to prevent EQ settigns from changing to GPIO settings when using I2C mode.

0 Kawa over 4 years ago in reply to Malik Barton57

Prodigy 155 points

Hi Malik,

I got it. Thank you.

Interface

Interface forum

TUSB1064: EQ setting