DP83848M:

Mark Chen52

Expert 5725 points

Part Number: DP83848M

Hi Expert,

My customer used DP83848M in server project.

they like to know how to execute the commands for IEEE comply test? Do we need application or programming to do it?”

Regards,

Mark

over 4 years ago

0 Roy Huang1 over 4 years ago

Prodigy 10 points

sorry, it should be IEEE compliance test

THX

0 Justin Lazaruk over 4 years ago in reply to Roy Huang1

TI__Expert 7040 points

Hello,

I've found some helpful past e2e threads that describe the register configuration needed to perform IEEE compliance testing on the DP83848.

100Base-TX: https://e2e.ti.com/support/interface/f/138/t/491013

10Base-T: https://e2e.ti.com/support/interface/f/138/t/606335

Furthermore, if you need additional information regarding the compliance test-suite and usb2mdio software to access the required registers, the app note below describes how to bring up TI devices for compliance testing.

http://www.ti.com/lit/an/snla239a/snla239a.pdf

Regards,
Justin

Interface

Interface forum

DP83848M: