TI E2E Community
High Speed Interface
High Speed Interface Forum
looking for ASI cable driver with PCML interface from FPGA.Do we have solution?
TI has a number of SDI cable drivers that will drive DVB-ASI at 270 Mbps:
The LMH0001 (up to 540 Mbps); LMH0002 (up to 1485 Mbps); and the LMH0302, LMH0303, and LMH0307 (all up to 2970 Mbps) have 3.3V CML inputs which may be compatible with the PCML interface you mention. TI's SDI cable driver inputs can also be AC coupled for flexible interfacing.
These cable driver outputs are intended to be AC coupled to 75 ohm cable. Most of TI's SDI cable drivers have one differential output driver, providing one true output and one complement output for driving cable. The LMH0307 provides dual differential outputs, which allows two true cable driver outputs for ASI (since DVB-ASI is polarity sensitive and only the true output is used).
If you can provide more details about your application, we can provide a specific recommendation.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.