Part Number: TFP410
My customer would like to know the current consumption of DVDD in TFP410.They checked current of DVDD, TVDD and PVDD of TFP410 in 3.3V output swing and 1.8V output swing cases. (Off course, the customer changed VREF Voltage to DVDD in 3.3V swing or 0.9V in 1.8V swing) The customer get the result as below.DVDD current consumption 16mA in 3.3V swing 35mA in 1.8V swingTVDD and PVDD ware not changed by output swing level.Is this result correct behavior of TFP410? The customer is concerned with their mistaking their schematics around TFP410.Note the customer condition BUS WIDTH： 24bit LATCH MODE： Single-edge CLOCK MODE： Single-ended CLOCK EDGE： failing edge Vref： 3.3V or 0.9VYour help would be so appreciated.Best Regards,Akihisa Tamazaki
In reply to Elias Villegas M.:
I see. Thank you for your answer.
Sorry for my response delayed.
Best Regards,Akihisa Tamazaki
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.