Part Number: DS90UB913A-Q1
With reference to the application note SNLA224 ,"Sending Power Over Coax in DS90UB913A Designs",how the resistor value parallel to the inductor is being chosen.
As we move to higher speeds (higher clock rate) in our design,we could experience data loss and we suspect the Inductor- Resistor combination values.
Please help us in choosing the value of components.
Any design references /notes will be highly helpful.
Training on FPD-Link Serializer Deserializer devices and system: https://training.ti.com/fpd-link-learning-center
More information on IVI or ADAS FPD-Link products: http://www.ti.com/interface/fpd-link-serdes/overview.html
In reply to Charley Cai:
Thanks for the prompt response.
Can you please let us know how these inductor and resistor values are being selected.
Would be more helpful on debugging the data loss at higher frequency issue.
In reply to Uma Sundaram:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.