for new HD-SDI DVR product based on the DM8168, Does TI have HD-SDI receiver chips?
There are two ways to implement a receiver for HD-SDI which will work with the DM8168.
To maximize versatility, the TI receiver solution segments the receiver into a deserializer and a data formatting portion - the deserializer can be a part such as the LMH0041 and the formatting is done within a low cost FPGA such as Spartan 3 or Cyclone 3. TI provides the FPGA IP along with the LMH0041 and one FPGA can support four or more receive channels.
Alternately, an FPGA with an integrated receive channel could be used, such as a Spartan 6, and in this case, the only external component required would be the cable equalizer - a good TI option for the would be the DS30EA101. Once again, using a single FPGA, multiple receive channels can be implemented.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.