• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 708 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913/DS90UB914 I2C communication

toshi-e2e
Genius 4705 points

Hi!, all

In case of below application using DS90UB913A/DS90UB914A,
can HOST read CAMERA's registers through I2C interface?

If yes,
when performing READ COMMAND of I2C communication,
is there any point which it should be careful of?  

Regrads,
Toshi

  • 0
    TI__Genius 13475 points

    Toshi

    Yes, the hose can read the cameras registers through the I2C interface.  Because the I2C signal will be going through two FPD-III links, the timing of the I2C is likely to be affected, so I would not use this configuration for timing critical I2C communications.

    Mark Sauerwald