Need the IBIS model for DS90CR483/4A devices

Jeyalakshmi Kanniah1

Prodigy 170 points

Other Parts Discussed in Thread: DS90CR483, DS90CR483A, DS90CR484, DS90CR484A

Hi,

I am using the DS90CR483/4A serdes devices in my design. I need the IBIS model for that devices. Please do the needful.

Thanks,

Jeyalakshmi

over 9 years ago

0 Mark Sauerwald88474 over 9 years ago

TI__Genius 13475 points

Please find the IBIS model here: www.ti.com/.../toolssoftware

0 Jeyalakshmi Kanniah1 over 9 years ago in reply to Mark Sauerwald88474

Prodigy 170 points

Hi,

I requesting the IBIS model for DS90CR483/4A device. But you have suggested the model link for DS90CR483-device. Is there any differences in model or can i use that model for DS90CR483A?. Please suggest me.

Thanks,

Jeyalakshmi

0 Mike Wolfe over 8 years ago in reply to Jeyalakshmi Kanniah1

TI__Expert 3050 points

Hi Jeyalakshmi,

The only difference between the DS90CR483 and the DS90CR483A is the functionality of the PLLSEL pin. The performance and behavior of the I/O is exactly the same.

This is also true for the DS90CR484 and the DS90CR484A. Only the functionality of the PLLSEL pin was changed.

Mike Wolfe
DPS APPS / SVA

Interface

Interface forum

Need the IBIS model for DS90CR483/4A devices