• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 506 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB913A-CXEVM & DS90UB914A-CXEVM

ttd
Mastermind 7660 points
Other Parts Discussed in Thread: DS90UB913A-CXEVM, DS90UB914A-CXEVM

Dear Technical Supprot Team,

I have a question about DS90UB913A-CXEVM & DS90UB914A-CXEVM.

This EVM has pull-up and pull-down for pallarel interface such as DINx , ROUTx.

http://www.tij.co.jp/jp/lit/ug/snlu135a/snlu135a.pdf

If customer makes original board, are these requrement for it?

If possible , they want to remove these pull-up/pull-down for pallarel interface.

I think these pull-up / pull-down for fixing input / output level if header does not connect anything connectors or wires.

Best Regards,

y.i